Mimaki CG-SRIII Series cutting plotters
The Mimaki CG-SRIII Series of roll-based cutters are available in three widths. These models feature continuous crop mark detection for precise contour cutting. A proprietary half cut function leaves a small bit of backing sheet at connecting points for easier handling. Accurate long-length cutting is enabled through segment compensation. These cutting plotters are ideal for producing decals, stickers, cut-vinyl signs and more.
Specifications of CG SR III Series
Item |
CG-60SRIII |
CG-100SRIII |
CG-130SRIII |
|
Acceptable sheet width |
90~740 mm |
90~1,250 mm |
90~1,550 mm |
|
Effective cutting area |
606 mm |
1,070 mm |
1.370 mm |
|
Maximum speed |
Cutting: 70 cm/s, Moving: 100 cm/s |
|||
Adjustable speed range |
1 – 10 cm/s (1 cm/s step adjustment), 1 – 70 cm/s (5 cm/s step adjustment) |
|||
Mechanical resolution |
X direction: 2.5 μmˎY direction: 5 μm |
|||
Command resolution |
25 μm or 10μm (MGL-IIc) / 100 μm, 50 μm (MGL-Ic1) |
|||
Repeatability*1 |
± 0.2 mm / 2 M |
|||
Effective Repeatability*2 |
586 mm × 2 M |
1,050 mm × 2M |
1.350 mm × 2M |
|
Maximum pressure |
500g |
|||
Range ofdown pressure | Cutter |
10 – 20 g(2 g step), 20 – 100 g(5 g step), 100 – 500g(10g step) |
||
Pen |
10 – 20 g(2 g step), 20 – 100 g(5 g step), 100 – 150g(10 g step) |
|||
Acceptable sheet*2 |
Vinyl sheet, Fluorescent type vinyl sheet, Reflective sheet, Rubber sheet |
|||
Acceptable tool*3 |
Cutter, Ball-point pen |
|||
Type of command |
MGL-IIC / MGL-Ic1 |
|||
Interface |
USB2.0ˎRS-232CˎEthernet |
|||
Receiver buffer size |
27 MB Standard (When sorting, 17 MB) |
|||
Operational environment |
5 – 35 ºC, 35 – 75 %(Rh), Non-condensation |
|||
Power requirement |
AC 100 V – 240 V, 145 VA or less |
|||
Dimensions (W x D x H) |
1,030 × 430 × 335 mm (1,030 × 430 × 1,185 mm)*4 |
1,530 × 580 × 1,150 mm |
1,830 × 580 × 1,150 mm |
|
Weight |
24kg |
41kg |
46kg |
|
Stand |
Optional equipment |
Standard equipment |
Standard equipment |